NEW CASE | New fully automatic robot palletizing solution for bags and boxes | Read more
×
Meurer’s CM-TA series of tray erectors features compact and flexible machines that can erect trays with low and high edges as well as display trays. The tray erector has throughput of up to 25 cycles per minute.
Compact and flexible
Operationally reliable
High quality
MEURER CM-TA 400/650Functional description
The sheet blanks are placed manually in the magazine. The tray erector picks up a blank and feeds it through the machine. Glue is applied on the flaps before the blank is pressed through a forming funnel which erects the tray.
Throughput: Up to 25 trays/min.
Tray length: 160–400/650 mm
Tray width: 60–300/400 mm
Tray height: 30–300 mm
Tray unfolded, length: 220–620/870 mm
Tray unfolded, width: 120–900/1,000 mm
Sealing method: Hotmelt
Lantech’s TE Tray erector is a series of good and stable small tray erectors with a throughput of up to 25 trays per min. Because of its small footprint, it can be integrated in virtually any production. The tray erector is easy to operate and designed so that an operator can carry out a complete changeover in 5-7 minutes.
Sheet blanks are placed manually in the magazine. The tray erector picks up a blank from the magazine and feeds it through the machine where it is glued and pressed through the forming device, where the tray is erected.
The machine comes with a photocell unit for installation downstream from the tray erector. When the photocell's line-of-sight is no longer blocked, a new cycle commences.
| TE-A | TE-B | TE-C | TE-D | |
|---|---|---|---|---|
| Throughput, up to: | 25 trays/min. | 21 trays/min. | 17 trays/min. | 20 trays/min. |
| Tray, length: | 180–600 mm | 280-600 mm | 280-600 mm | 100-340 mm |
| Tray, width: | 100–400 mm | 200-400 mm | 200-400 mm | 180-260 mm |
| Tray, height: | 40-350 mm | 150/40-400/100 mm | 50-150 mm | 40-300 mm |
| Sealing method: | Hotmelt | Hotmelt | Folding | Hotmelt |
| Tray outfeed: | Right or left side | |||
| Other: | Complete monitoring of glue unit, magazine, etc., available as an option. | |||
The Lantech SC-1000 inline is designed for closure of tray stacking edges. It is a good, reliable small stacking edge closer with a throughput of up to 20 trays per min.
The machine's small footprint allows it to be integrated in virtually any production line. The stacking edge closer is easy to operate, and it can close stacking edges on a variety of tray sizes. A folding frame is required for each tray size.
Stacking edge closure
Can fold the edges on an erected tray
Compact
High quality
Low operating costs
Trays are fed into the machine with the stacking edge in the open position. As the trays pass through the machine, glue is applied on the stacking edge and/or the tray sides. When a tray is located beneath the folding frame, the stacking edge is folded and glued. The finished tray is removed from of the machine.
Throughput: Up to 20 trays/min.
Tray length: 200-600 mm
Tray width: 200-400 mm
Tray height: 40-100/400 mm
Stacking edge: 45-70 mm
Sealing method: Hotmelt
Other: Complete monitoring of the glue unit available as an option
Tray erectors can be integrated in various packaging systems. See other examples of tray erector solutions in our Cases section.
Anders Bundgaard Jensen
abj@sealing-system.dk
Tel. +45 2055 5834
