Click the picture for a larger image
EasyPlast is a standalone machine for putting bags into e.g. cardboard boxes, plastic crates, meat crates, barrels, etc.
The machine is prepared for use in an in-line production set-up.
The box is advanced to the position where the bag is placed inside the box. The bag is picked up from a dual magazine by means of vacuum. The bag is spread out so as to fit neatly into the case’s four corners. The bag ends are folded over the top edge of the case. The bag magazine can be replenished without stopping the machine.
|Throughput||Up to 25 cases/min. (depending on the case size and chosen technology)|
|Magazine type||Dual, capacity approx. 500 bags|
|Case, length||300 – 650 mm|
|Case, width||200 – 650 mm|
|Case, C-height (open top flaps)||200- 500 mm|
|Case types||Cardboard, plastic crates, meat trays, etc.|
|PLC||Siemens S7 (if servo technology is chosen, Bosch Rexroth is used instead)|
|Carton outfeed||Right or left side|
|Machine finish||Painted RAL 7011 or stainless steel|
|Other||The machine may be adjusted to match other case/crate dimensions than the measurements given below.|
Subject to change without notice